The original horsepower in a bottle.

The Most Potent Octane Booster You Can Buy! Restores & Improves Horsepower.

NOS Octane Booster
NOS Max Street Octane Booster

About NOS

The Original Horsepower in a bottle

Nitrous Oxide Systems (NOS) was founded in 1978 by well-known drag racers Mike Thermos and Dale Vaznaian to market products utilizing N20.


Through introducing precisely metered amounts of nitrous and petrol into an engine, tremendous gains in power were obtained essentially as a result of increasing combustion pressure. This underscored the need to improve the potency of available pump petrol, and the net result is NOS Octane Booster.


It is formulated to eliminate the preignition (pinging) common to lower octane petrol, and helps in all situations from towing heavy loads on steep inclines in a stock vehicle to racing with nitrous oxide at the track.


Check out the complete line of NOS fuel additives.

Our Products

Our Products

NOS Octane Booster Racing Formula

The Most Potent Octane Booster You Can Buy!

Increases Octane Effect Up to 3.1 Full Octane Numbers or 31 Points
MMT and with


NOS performance for the serious racing enthusiast. Developed to increase octane effect up to 31 points or 3.1 full octane numbers. Blended with MMT and our performance enhancing Powertane, along with Nitro Methane and unique lubricants.

NOS Octane Booster Racing Formula

  • Increases Octane Effect Up to 3.1 Full Octane Numbers or 31 Points (1 octane = 10 points)
  • For Racing Use Only
  • Eliminates Knocks, Pings and Hesitations
  • Cleans fuel injectors and combustion chamber

  • Safe for oxygen sensors and catalytic converters
  • Protects against deposit build-up
  • Excellent as a lead substitute
  • Reduces hydrocarbon and carbon monoxide emissions
  • Meets BMW requirements for IVD detergency
  • Provides corrosion protection
  • Improves fuel efficiency
  • Prevents valve sticking
  • Prevents stalling and hesitation
  • Recommended for high-performance engines plus marine, lawn, farm and recreational equipment

  1. Remove child resistant cap and puncture foil seal with a sharp object. Screw the supplied fuel adapter onto the bottle.
  2. Add the contents of the bottle to at least 16 gallons of gasoline. If spilled onto painted surface, wipe off immediately.
  3. Replace cap after use and dispose of bottle, fuel adapter and contaminated rags or towels in accordance with federal, state and local regulations.
  4. Never expose liquid product to direct or indirect sunlight.

NOTE: Not legal for street use.

WARNING

This product can expose you to chemicals including Naphthalene, Ethyl Benzene, and Nitromethane, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Our Products

NOS Max Street Octane Booster

For the serious enthusiast

Maximum MMT concentration allowed by law for street use

NOS performance for any gasoline powered street vehicle. Increases octane effect up to 15 points or 1.5 octane. Blended with MMT and our unique performance enhancing Powertane.

NOS Max Street Octane Booster

  • Increases Octane Effect Up to 1.5 Full Octane Numbers or 15 Points (1 octane = 10 points)
  • For Street Use
  • Restores and improves horsepower
  • Improves gas mileage
  • Eliminates knocks, pings and hesitation
  • Protects against deposit buildup
  • Safe for oxygen sensors and catalytic converters

  1. Add the contents of the bottle to at least 16 gallons of gasoline.
  2. Remove cap and pour entire contents into fuel tank. If spilled onto painted surface, wipe off immediately.
  3. Replace cap after use and dispose of bottle, fuel adapter and contaminated rags or towels in accordance with federal, state and local regulations.

NOTE: Never expose liquid product to direct or indirect sunlight.

WARNING
This product can expose you to chemicals including Naphthalene and Ethyl Benzene, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Contact

Consumer Questions & Comments:

information@itwgb.com

Technical Information & Questions:

Technical@itwgb.com

Mailing Address:

ITW Global Brands
6925 Portwest Drive
Houston, TX 77024-8042

Toll Free & Fax:

Monday through Friday 8:00am – 5:00pm EST
855-888-1990 (Toll free)
Fax 855-888-1991

New Business Inquiries:

information@itwgb.com

Material Safety Data Sheets (MSDS) or Technical Data Sheets (TDS):

www.itwgb.com

Privacy Policy

ITW Global Brands Website Terms and Conditions
Privacy Policy - Collection and Use of Personal Information
ITW Global Brands operates this website. This policy explains our collection, use, protection and disclosure of your personal information.

ITW Global Brands respects your privacy and is committed to protecting personally identifiable information that you provide in connection with your use of this site and services.

What information is collected and stored?
We receive and store information you enter on our website. For example, we collect information you provide when you opt-in to receive information about our products and company. This information may include: your name, mailing address, billing address, email address, your phone number, along with any other information that you may submit. To prevent unauthorized access, maintain data accuracy, and ensure the correct use of information, we have put in place appropriate physical, electronic, and managerial procedures to safeguard and secure the information we collect and store online.
Personal information collected on this site may be stored and processed in the United States or any other country in which ITW Global Brands or its third party service providers maintain facilities. By using this site, you consent to any such transfer of information outside of the United States. By way of example, this may happen if any of our servers are located in a country outside of the US or one of our service providers is located in a country outside of the US. These countries may not have similar data protection laws to the US. If we transfer your information outside of the US in this way, we will take steps to ensure that your privacy rights continue to be protected. In addition, if you use our services while you are outside the US, your information may be transferred outside the US in order to provide you with those services.

What about cookies?
Cookies are small pieces of information that are stored on your hard drive. This enables our systems to recognize who you are. Our cookies do not contain any personally identifying information. Your browser allows you to reject cookies, and software is available from third parties which will allow you to visit our website without providing this information. Please note, however, that if you block cookies, some portions of the site and personalized services offered by us may not function properly. We do not control cookies in third party website links and ads, and you are encouraged to check the privacy policies of such third parties to learn about their use of cookies and other similar technology.

Do you share the information I give you?
No, we do not share any information with anyone outside of our company. We use your information to optimize your use of this website. If you Opt-In to receive future communications from us, we may send you additional information about our products and promotions.

What about links to other websites?
Our website may offer links to other sites, but we do not transfer any of your personal information to that site. However, if you enter any information on another site, you are encouraged to review the privacy policy on that site. This Privacy Policy does not cover the use of information collected from you by third party websites.

What is your children's policy?
If you are under 13 years old, please do not send us your personal information (for example: your name, address, email address). If you are under 13 years old and you wish to ask a question or use this site in any way that requires you to submit your personal information, please get your parent or guardian to do so on your behalf.

What happens when I choose to "Opt-In"?
We use information about you to deliver the services that you request, to keep you informed about changes affecting our services on your account, to inform you of other services or promotions in which you might be interested, and to improve and enhance our site and services.
If you "Opt-In" to receive further communications from us, you may receive future communications regarding our products and/or services. You can always “Opt–Out” of future marketing messages by following the directions in each message to "unsubscribe".

What about changes to our policy?
Our Privacy Policy is intended to provide you with the safest and most secure informational experience possible. We reserve the right to change, modify, add or remove portions of our Privacy Policy at any time, with or without prior notice. We suggest that you periodically review our Privacy Policy, as the effective date of any new Privacy Policy will be clearly marked.
How you can contact us.

If you would like to contact us, please email ITW Global Brands at information@itwgb.com.

Effective Date: March 2011

Terms & Conditions

Acceptance
The Illinois Tool Works Inc. division, affiliation or subsidiary selling products (“Products”) or services (“Services”) is herein referred to as “ITW,” and the customer purchasing from ITW is referred to as “Purchaser” These terms and conditions of sale (“Terms”), any ITW quotation, acknowledgment or invoice and all documents incorporated by specific reference herein or therein (“ITW Documents” and together with these Terms, the “Agreement”), constitute the complete terms governing the sale of Products and Services. ITW HEREBY REJECTS ANY ADDITIONAL OR DIFFERENT TERMS OR CONDITIONS PROPOSED BY PURCHASER, WHETHER OR NOT CONTAINED IN ANY OF PURCHASER’S BUSINESS FORMS OR IN PURCHASER’S WEBSITE, AND SUCH ADDITIONAL OR DIFFERENT TERMS WILL BE OF NO EFFECT. No site usage agreement or any other click through agreement on a website will have any binding effect whether or not ITW clicks on an “ok,” “I accept,” or similar acknowledgment. Commencement of any work by ITW or Purchaser's acceptance of delivery of the Products or Services will manifest Purchaser's assent to the Agreement. Additional or different terms applicable to a particular sale may be specified in the body of an ITW Document or agreed to in writing by the parties. In the event of a conflict, the following order of precedence will apply: (a) terms agreed to in writing and executed by an authorized officer of ITW; (b) ITW Document terms; (c) these Terms.

Quotations
Quotations are only valid in writing and for 30 days from the date of the quotation. All quotations are subject to change or withdrawal without prior notice to Purchaser. Quotations are made subject to approval of Purchaser’s credit. ITW may refuse orders and has no obligation to supply Products or Services unless ITW issues an order acknowledgement or upon the shipment of Products or commencement of Services.

Prices and Payment Terms
Prices are in U.S. Dollars and are subject to change without notice. All orders are accepted subject to ITW’s price in effect at time of shi Prices do not include any sales, use, value-added or other taxes, import duties, license fees or like charges (“Fees”) related to the sale, importation or use of Products or Services, and Purchaser is responsible for those Fees. If ITW is subsequently required to pay any Fees, Purchaser shall fully defend and indemnify ITW therefor. Terms of payment are 30 days net from the date of ITW’s invoice. Overdue invoices will incur interest at the rate of 1.5% per month, or at the maximum rate allowable by governing law. Purchaser’s inspection rights herein will not affect the payment terms. Under no circumstances will Purchaser have a right of set-off. If Purchaser fails to make any payment as required, Purchaser agrees to indemnify ITW for all associated costs incurred by ITW, including reasonable attorney fees and court costs.

Credit Approval
All shipments are subject to approval by ITW’s credit department. ITW may invoice Purchaser and recover for each shipment as a separate transaction. If, in ITW’s sole judgment, Purchaser’s financial condition is or becomes unsatisfactory, then ITW may, without prejudice to any of its other remedies: (a) defer or decline to make any shipments except upon receipt of satisfactory security or cash payments in advance; and/or (b) terminate any or all of Purchaser’s purchase orders.

Cancellation or Modification
ITW may cancel any purchase order or release thereunder, or terminate any agreement relating to the purchase of ITW’s Products or Services upon reasonable prior written notice to Purchaser. Once ITW has accepted a purchase order or begun taking actions with respect to a purchase order, Purchaser cannot cancel or modify that purchase order except with ITW’s written consent. In such event, Purchaser will be liable for cancellation or modification charges and all costs incurred and committed for the order or in connection with the cancellation or modification, as applicable, together with a reasonable allowance for prorated expenses and anticipated profits.

Inspection / Non-Conforming Shipments
Purchaser may inspect Products for a period of 15 business days after delivery (“Inspection Period”). Purchaser must notify ITW in writing of any Products that do not conform to the specifications applicable to their sale within the Inspection Period and afford ITW a reasonable opportunity to inspect such Products and cure any nonconformity. If Purchaser fails to provide ITW such written notice within the Inspection Period, Purchaser will be deemed to have accepted the Products. Purchaser may not return any Product without ITW’s prior written authorization. Any return authorized by ITW must be made in accordance with ITW’s return policies. Purchaser will be responsible for all costs associated with returns of Products and will bear the risk of loss, unless ITW agrees otherwise in writing or determines that the Products do not conform to the applicable terms of sale. Any variation in quantities shipped over or under those ordered (not to exceed 10%) will constitute compliance with Purchaser’s order, and the stated price per item will continue to apply.

ITW anticipates use of common carriers for shipment of Products. The carrier, and not ITW, will bill for freight rates and other shipping charges. Payments for such charges shall be paid by Purchaser directly to the carrier. All Products will be shipped ExWorks ITW’s facility (Incoterms 2010). Shipping dates are approximate and are based upon prompt receipt of all necessary information from Purchaser. ITW may ship items in a single or multiple shipments. Title to the Products and risk of loss shall pass to Purchaser upon delivery in accordance with the applicable shipping term. Purchaser assumes all risk and liability for loss and use or misuse by third parties who acquire or use the Products illicitly after delivery. Purchaser must notify ITW and the delivering carrier within 15 business days from date of receipt of Products, of any damage or shortage, and afford ITW a reasonable opportunity to inspect the Products. Any loss occasioned by damage or shrinkage in transit will be for Purchaser’s account, and claims for such loss must be made solely against the carrier.

Limited Warranty
ITW warrants that it will convey the Products free and clear of all liens, security interests and encumbrances created by, through or under ITW. ITW further warrants that for a period of 6 months from the date of delivery to the common carrier (the “Warranty Period”), under normal use and given proper installation and maintenance as determined by ITW, the Products: (a) will conform to mutually agreed upon written specifications or other descriptions; and (b) will be free from substantial defects in material and workmanship.

In the event of a breach of the warranties set forth above (the “Warranties”), ITW will, at ITW’s option and as ITW’s sole liability and Purchaser’s sole remedy, repair, replace or credit Purchaser’s account for, any Product that fails to conform to the Warranties, provided that (i) during the Warranty Period ITW is promptly notified in writing upon discovery of such failure with a detailed explanation of any alleged deficiencies; (ii) ITW is given a reasonable opportunity to investigate all claims; and (iii) ITW’s examination of such Product confirms the alleged deficiencies and that the deficiencies were not caused by accident, misuse, neglect, normal wear and tear, improper installation, unauthorized alteration or repair or improper testing. No Products may be returned to ITW until inspection and approval by ITW.

The Warranty against defects does not apply to: (1) consumable components or ordinary wear items; or (2) use of the Products with equipment, components or parts not specified or supplied by ITW or contemplated under the Product documentation.

EXCEPT AS SET FORTH HEREIN, ITW MAKES NO WARRANTY OR REPRESENTATION OF ANY KIND, EXPRESS OR IMPLIED (INCLUDING NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE).

Service Warranty
ITW warrants that (a) it will perform Services in a timely, competent and professional manner and in accordance with industry standards; and (b) the Services shall conform to any mutually agreed upon specifications or statements of work. Purchaser’s sole remedy, and ITW’s sole liability, for a breach of the foregoing warranty is for ITW, at its option, to re-perform the Services or credit Purchaser’s account for such Services.

Limitation of Liability and Remedies
ITW WILL NOT BE LIABLE, AND PURCHASER WAIVES ALL CLAIMS AGAINST ITW, FOR INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, DOWN TIME, LOST PROFITS OR COMMERCIAL LOSSES, WHETHER OR NOT BASED UPON ITW’S NEGLIGENCE OR BREACH OF WARRANTY OR STRICT LIABILITY IN TORT OR ANY OTHER CAUSE OF ACTION. IN NO EVENT WILL ITW’S LIABILITY IN CONNECTION WITH THE AGREEMENT OR SALE OF ITW’S PRODUCTS OR SERVICES EXCEED THE PURCHASE PRICE OF THE SPECIFIC PRODUCTS OR SERVICES AS TO WHICH THE CLAIM IS MADE.

Product Use
Purchaser is solely responsible for determining if a Product is fit for a particular purpose and suitable for Purchaser’s method of application. Accordingly, and due to the nature and manner of use of ITW’s Products, ITW is not responsible for the results or consequences of use, misuse or application of its Products. All physical properties, statements and recommendations are either based on the tests or experience that ITW believes to be reliable, but they are not guaranteed.

Tooling/Molds/Dies
All material, equipment, facilities and special tooling (including tools, jigs, dies, fixtures, molds, patterns, special taps, special gauges, special test equipment and manufacturing aids and replacements thereof) used in the manufacture of the Products will remain the property of ITW. Any material, tooling or equipment furnished to ITW by Purchaser will remain the property of Purchaser with title to and right of possession remaining in Purchaser.

Consignment
If Products are sold on a consignment basis, title in such Products will not pass to Purchaser until the earlier of: (a) the time the Product is removed from inventory for use; or (b) the date that is 90 days from the Product’s shipment date. ITW will have a purchase money security interest in consigned Products and may file a financing statement in accordance with the Uniform Commercial Code. Purchaser agrees to store consigned Products in a segregated area and will install and/or maintain any signs or other devices to clearly identify the Products as ITW Products. Purchaser assumes the risk of loss of all consigned Products. Purchaser shall insure consigned Products at Purchaser’s expense in amounts at least equal to the replacement value.

Ownership of Intellectual Property
All drawings, know-how, designs, specifications, inventions, devices, developments, processes, copyrights and other information or intellectual property disclosed or otherwise provided to Purchaser by ITW and all rights therein (collectively, “Intellectual Property”) will remain the property of ITW and will be kept confidential by Purchaser in accordance with these Terms. Purchaser has no claim to, nor ownership interest in, any Intellectual Property, and such information, in whatever form and any copies thereof, shall be promptly returned to ITW upon request from ITW. Purchaser acknowledges that no license or rights of any sort are granted to Purchaser hereunder in respect of any Intellectual Property, other than the limited right to use ITW’s Products or receive the Services purchased from ITW.

Use of Trademarks and Trade Names
Purchaser shall not use, directly or indirectly, in whole or in part, ITW’s name, or any other trademark or trade name that is now or may hereafter be owned by ITW (collectively the “Trademarks”), as part of Purchaser’s corporate or business name, or in any way in connection with Purchaser’s business, except in a manner and to the extent authorized herein or otherwise approved by ITW in writing. Purchaser hereby acknowledges ITW’s ownership of the Trademarks and the goodwill associated therewith. Purchaser shall not infringe upon, harm or contest the validity of any Trademarks. Purchaser shall be entitled to use the Trademarks only in connection with the promotion or sale of the Authorized Products pursuant to the terms of the Agreement. Purchaser shall reproduce the Trademarks exactly as specified by ITW. Purchaser shall not use the Trademarks in combination with any other trademarks or names. Purchaser agrees that it will not register or attempt to register any Trademark or any colorable imitation thereof (including any non-English language variation thereof), or use such Trademarks for any products or for any purposes other than those set forth in the Agreement. Purchaser shall not at any time during or after termination of the Agreement use in its business any other trademark that is similar to or in any way resembles the Trademarks so as to be likely to cause deception or confusion with the Trademarks. Purchaser shall provide reasonable cooperation to ITW with respect to any efforts of ITW to protect, defend or enforce its rights to the Trademarks. Should Purchaser cease being an authorized customer of ITW for any reason, Purchaser shall immediately discontinue any formerly permitted use of ITW’s name or the Trademarks.

Confidential Information
All information furnished or made available by ITW to Purchaser in connection with the subject matter hereof shall be held in confidence by Purchaser. Purchaser agrees not to use (directly or indirectly), or disclose to others, such information without ITW’s prior written consent. The obligations in this section will not apply to any information that: (a) at the time of disclosure was or thereafter becomes generally available to the public by publication or otherwise through no breach by Purchaser of any obligation herein; (b) Purchaser can show by written records was in Purchaser’s possession prior to disclosure by ITW; or (c) is legally made available to Purchaser by or through a third party having no direct or indirect confidentiality obligation to ITW with respect to such information.

Unless agreed to in writing by an officer of ITW, neither Purchaser nor any Purchaser representative, may examine or audit ITW’s cost accounts, books or records of any kind or any matter, or any other data that ITW, in its sole discretion, considers confidential or proprietary.

Infringement and Indemnification
Except as set forth below, ITW agrees to defend and indemnify Purchaser against any claims, costs, damages, liability and expenses resulting from actual patent, trademark or copyright infringement, misappropriation of confidential information, or violation of any other Intellectual Property right, domestic or foreign that may arise from the sale of ITW’s proprietary Product to Purchaser as such pertains to the subject matter of the Agreement (each, a “Claim”); provided, however, (a) Purchaser supplies ITW written notice of such Claim immediately after the Purchaser has notice of such Claim, (b) Purchaser cooperates with ITW in the defense and settlement of such Claim; and (c) Purchaser allows ITW the right to defend and settle such Claim at ITW’s expense If a suit or claim results in any injunction or order that would prevent ITW from supplying any part or Product falling under the Agreement, or if the result of such a suit or claim would, in the reasonable opinion of ITW, otherwise cause ITW to be unable to supply such parts or Products, ITW may do one or more of the following: (i) secure an appropriate license to permit ITW to continue supplying those parts or Products; (ii) modify the appropriate part or Product so that it becomes non-infringing; (iii) replace the appropriate part or Product with a non-infringing but practically equivalent part or Product; or (iv) if ITW cannot reasonably accomplish the actions specified in subsections (i) – (iii), then in ITW’s sole discretion, ITW may discontinue selling the part or Product without any further liability to Purchaser. Notwithstanding the foregoing, ITW shall have no liability or duty to defend and indemnify Purchaser against any Claim relating to: (1) the use of any part or Product, (2) the combination of any part or Product with any other part or product not supplied by ITW, or (3) any part or Product or process that is designed or specified by Purchaser.

ITW Employees
ITW sales and service employees do not have the training or authority to make legal representations or enter into any agreements or execute any Purchaser documents affecting legal responsibilities or waiving legal rights, including those regarding the transfer of intellectual property rights or related to privacy laws. Any such representations, agreements or documents will not be binding on ITW or such ITW employees.

Service Terms
The following terms and conditions apply to any on-site Services provided by ITW:

Services will be provided at ITW’s then current service rates.

Purchaser shall prepare the site for the Services. If the site is not prepared for the Services upon ITW service personnel’s arrival at the agreed upon time and date for Services, ITW may charge Purchaser for any delay and/or travel time at ITW’s regular service rates.

Purchaser shall provide ITW with advance notice of any rules, regulations, statutes and requirements applicable to the Services, including any required permits and licenses, that are applicable to Purchaser’s local jurisdiction.

ITW may refuse, without any liability, to provide Services and to allow ITW service personnel to suspend Services or vacate any site where, in ITW’s opinion, performance of Services would pose a risk to the safety of any person. In such event, Purchaser is responsible for payment of any delay and/or travel time at ITW’s regular service rates.

Purchaser is solely liable for all damages or injuries caused or contributed to by Purchaser that may occur on the site, except to the extent damages or injuries are directly caused by the gross negligence or willful misconduct of ITW service personnel.

Purchaser must provide at least 24 hours’ notice of cancellation of any Service order. If Purchaser cancels with less than 24 hours’ notice, Purchaser is responsible for any costs incurred by ITW caused by such cancellation.

Compliance
Purchaser agrees to comply with all federal, state, local and foreign rules, regulations, ordinances and laws applicable to Purchaser’s obligations hereunder and Purchaser’s use of the Products and Services, including import/export laws, labor laws and anti-corruption laws.

Relationship of the Parties
Nothing in the Agreement or the course of dealing of the parties may be construed to constitute the parties hereto as partners, joint venturers or as agents for one another or as authorizing either party to obligate the other in any manner.

Force Majeure
ITW will not be responsible for failure to perform in a timely manner under the Agreement when its failure results from events beyond its reasonable control (an event of “Force Majeure”), including acts of God, epidemics, acts of war whether declared or undeclared, blockades, labor disputes (whether of ITW’s employees or the employees of others), raw material shortages and material increases in costs of raw materials. In the event of Force Majeure, the time for performance will extend for such time as reasonably necessary to enable ITW to perform.

Assignment; Binding Effect
No assignment of any rights or interest or delegation of any obligation of Purchaser under the Agreement or Purchaser’s purchase order may be made without ITW’s prior written consent. Any attempted assignment will be void. ITW may assign the Agreement or otherwise transfer its rights and/or obligations under the Agreement. The Agreement will inure to the benefit of and be binding upon the parties and their respective permitted successors and assigns.

Waiver
In the event of any default by Purchaser, ITW may decline to ship Products or provide Services. If ITW elects to continue shipping or otherwise fails to insist upon strict compliance with the Agreement, ITW’s actions will not constitute a waiver of Purchaser’s default or any other existing or future default, or affect ITW’s legal remedies.

Bankruptcy
If either party becomes insolvent, is unable to pay its debts when due, files for or is the subject of involuntary bankruptcy, has a receiver appointed or has its assets assigned, the other party may cancel any unfulfilled obligations hereunder.

Limitation of Actions/Choice of Law
Any dispute arising out of or related to the Agreement will be governed by and construed according to the laws of the state of Illinois and litigated exclusively in a state or federal court located in Cook County, Illinois. The parties hereto expressly release and waive any and all rights to a jury trial and consent to have any dispute heard solely by a court of competent jurisdiction. The parties agree that the United Nations Convention on Contracts for the International Sale of Goods will not apply to the Agreement.

Survival
Any provisions in the Agreement which, by their nature, extend beyond the termination or expiration of any sale of Products or Services, will remain in effect until fulfilled.

Severability
If any provision herein is held to be unlawful or unenforceable, the remaining provisions herein will remain in effect.

Integration and Modification
The Agreement constitutes the entire agreement between ITW and Purchaser with respect to the Products and Services covered by the Agreement, and supersedes any prior agreements, understandings, representations and quotations with respect thereto. No modification hereof will be of any effect unless in writing and signed by the party to be bound thereby.